Nike Zoom Victories Good For 800 Meters?

solvent-free protection against water, grease, oil specifically for marble and limestone


stain MARBLE (S-FS4) considered well balanced the desire for maximum protection with a long shelf life, the steam diffusion permeability of the stone, the easy and economical processing of the impregnation, the reduction of hazardous substances during Use and the aesthetics of the stone. It remains even after the treatment, a natural stone!

S-FS4 is a water-based impregnation in the neutral pH range and thus ideal for polished marble, limestone and other acid-sensitive surfaces. It penetrates well into the dense capillary structure of stones and rocks to protect them from contamination by water, grease, oil, wax, etc. This contamination is largely retained at the surface and can usually be cleaned without detergent from the surface provides a very good easy-care equipment in highly polluted areas such as kitchens, dining areas, on tables and counters inside and outside. Can also be applied to damp surfaces rest.

The surface here remains unchanged in its natural color and surface texture. A minimal color change occurs depending on a rock in very rare cases. There is no layer is formed on the surface and the steam diffusion permeability is retained.

Free of silicones and waxes. The protective materials are fluoropolymers, received a very permanent bond with the surface. This also applied safely in areas of food processing.

processing temperature: 10-25 ° C
not dilute product! Shake well before use. With brush, roller, Sponge or mop apply liberally to the residue-free clean, dry surface and move in 5-10 minutes. grudge At high absorbency material. Before the product dries residue-free wipe dry with towels. Alternatively, the excess can be removed with a squeegee. Not to cover areas and / or impregnated with product immediately with a damp cloth

The coating can be committed again after 30-60 minutes. The protection of the impregnation develops over a period of several days. This should also be observed when creating sample surfaces. During this period, only to tap water without additives are used for cleaning. Then P-StSei silk soap is recommended for routine care of the rubber wiper. In heavy load areas (kitchen, bathroom, garage, shopping centers) can also be in the interval with three floor to be maintained to continually refresh the impregnation.


yield 1 liter for about 10-20m ²:

prevent film formation.
stones such as marble and limestone are attacked by acid. Vinegar, soft drinks and fruit juices contain acids that can damage eyes and a dull left these stones represent. Stain-resistant S-FS4 can not protect these GTC, however, the destructive effects are delayed and reduced.

our Shop:
http://www.sauberstein.de

Beastiality/zoophilia Movies

mold EX; removing agent against Aspergillus and Stachybotrys


The best way to mold the mold is of course to emerge until they occur. Who is not the cause of the mold can fight, with no long-term defeat the mold remover mildew in the house.
If the mold, but once there is, for many the problem which means to mold because now is the right thing. Is the house really useful means to mold or must it be the superagressive Mildew from the dealer actually?

A small response on anti-mildew agent.

start with the known home remedies for mold - the vinegar solution. Sorry, this home remedy for mold is to use only a very limited extent in the battle with mold. If you use the vinegar on ceramic surfaces, glass or other porous surfaces can certainly achieve success with vinegar because the vinegar has a low PH value and does not fit most of mushrooms. Our home remedies for mold but can fail on calcareous substrates (plaster, etc.) very quickly its service because of the low lime neutralizes PH value of the vinegar and will turn to its effect niece. Worse, this home agent can then also the basis for renewed Mold growth, be there vinegar also contains various nutrients. Be careful with home remedies to mold vinegar based

often be bought in supermarkets and hardware stores, there are spray bottles from different manufacturers with a chlorine solution . This anti-mildew agents are quite used to mold. However, it should be fought with means that only small areas to mold itself, because the chlorine fumes can cause improper use of personal health. Therefore, use this anti-mildew agent in a well ventilated area and small quantities. (Be sure to follow the operating instructions of the mold remover!).

An effective way to mold is high-proof alcohol or isopropanol. In a concentration of 70 - 80% successfully killing off any surface mold. He is also a relatively low odor and evaporates quickly. However, the rule is again: only in well ventilated areas and use only non-smoking at work or to use other open flames! As a means to mold remover containing alcohol in most cases, any other mold remover is preferable.
(Excerpts taken from "mold Ratgeber.de)

mold EX; 500ml spray bottle
remover against Aspergillus and Stachybotrys;
After UBA - Guidelines
On the basis of bio-ethanol - (bio ethanol is recommended by several institutes such as Fraunhofer Institute)
ethanol 70% - C2 H6 O

Before removing visible mold infestation of the affected area compared to other residential areas to foreclose. Remove food from the contamination area.
you clean wet surfaces and objects, and then the surface with mold-EX
disinfect with extensive involvement as possible hire a specialist with the remediation of mold, as this can occur in removing high spore concentrations.

We offer 500ml containers in a practical spray bottle in our shop:
http://www.sauberstein.de to
.