The best way to mold the mold is of course to emerge until they occur. Who is not the cause of the mold can fight, with no long-term defeat the mold remover mildew in the house.
If the mold, but once there is, for many the problem which means to mold because now is the right thing. Is the house really useful means to mold or must it be the superagressive Mildew from the dealer actually?
A small response on anti-mildew agent.
start with the known home remedies for mold - the vinegar solution. Sorry, this home remedy for mold is to use only a very limited extent in the battle with mold. If you use the vinegar on ceramic surfaces, glass or other porous surfaces can certainly achieve success with vinegar because the vinegar has a low PH value and does not fit most of mushrooms. Our home remedies for mold but can fail on calcareous substrates (plaster, etc.) very quickly its service because of the low lime neutralizes PH value of the vinegar and will turn to its effect niece. Worse, this home agent can then also the basis for renewed Mold growth, be there vinegar also contains various nutrients. Be careful with home remedies to mold vinegar based
often be bought in supermarkets and hardware stores, there are spray bottles from different manufacturers with a chlorine solution . This anti-mildew agents are quite used to mold. However, it should be fought with means that only small areas to mold itself, because the chlorine fumes can cause improper use of personal health. Therefore, use this anti-mildew agent in a well ventilated area and small quantities. (Be sure to follow the operating instructions of the mold remover!).
An effective way to mold is high-proof alcohol or isopropanol. In a concentration of 70 - 80% successfully killing off any surface mold. He is also a relatively low odor and evaporates quickly. However, the rule is again: only in well ventilated areas and use only non-smoking at work or to use other open flames! As a means to mold remover containing alcohol in most cases, any other mold remover is preferable.
(Excerpts taken from "mold Ratgeber.de)
mold EX; 500ml spray bottle
remover against Aspergillus and Stachybotrys;
After UBA - Guidelines
On the basis of bio-ethanol - (bio ethanol is recommended by several institutes such as Fraunhofer Institute)
ethanol 70% - C2 H6 O
Before removing visible mold infestation of the affected area compared to other residential areas to foreclose. Remove food from the contamination area.
you clean wet surfaces and objects, and then the surface with mold-EX
disinfect with extensive involvement as possible hire a specialist with the remediation of mold, as this can occur in removing high spore concentrations.
We offer 500ml containers in a practical spray bottle in our shop:
http://www.sauberstein.de to
.
0 comments:
Post a Comment