stain MARBLE (S-FS4) considered well balanced the desire for maximum protection with a long shelf life, the steam diffusion permeability of the stone, the easy and economical processing of the impregnation, the reduction of hazardous substances during Use and the aesthetics of the stone. It remains even after the treatment, a natural stone!
S-FS4 is a water-based impregnation in the neutral pH range and thus ideal for polished marble, limestone and other acid-sensitive surfaces. It penetrates well into the dense capillary structure of stones and rocks to protect them from contamination by water, grease, oil, wax, etc. This contamination is largely retained at the surface and can usually be cleaned without detergent from the surface provides a very good easy-care equipment in highly polluted areas such as kitchens, dining areas, on tables and counters inside and outside. Can also be applied to damp surfaces rest.
The surface here remains unchanged in its natural color and surface texture. A minimal color change occurs depending on a rock in very rare cases. There is no layer is formed on the surface and the steam diffusion permeability is retained.
Free of silicones and waxes. The protective materials are fluoropolymers, received a very permanent bond with the surface. This also applied safely in areas of food processing.
processing temperature: 10-25 ° C
not dilute product! Shake well before use. With brush, roller, Sponge or mop apply liberally to the residue-free clean, dry surface and move in 5-10 minutes. grudge At high absorbency material. Before the product dries residue-free wipe dry with towels. Alternatively, the excess can be removed with a squeegee. Not to cover areas and / or impregnated with product immediately with a damp cloth
The coating can be committed again after 30-60 minutes. The protection of the impregnation develops over a period of several days. This should also be observed when creating sample surfaces. During this period, only to tap water without additives are used for cleaning. Then P-StSei silk soap is recommended for routine care of the rubber wiper. In heavy load areas (kitchen, bathroom, garage, shopping centers) can also be in the interval with three floor to be maintained to continually refresh the impregnation.
yield 1 liter for about 10-20m ²:
prevent film formation.
stones such as marble and limestone are attacked by acid. Vinegar, soft drinks and fruit juices contain acids that can damage eyes and a dull left these stones represent. Stain-resistant S-FS4 can not protect these GTC, however, the destructive effects are delayed and reduced.
our Shop:
http://www.sauberstein.de
0 comments:
Post a Comment