bioB - Biobond
micro-organic repellent
Biobond is a biological, moisture-locking product, easy to use,
none and absolutely reliable; also suitable for injecting !
Specific properties of Biobond
aqueous, chlorine-free impregnating solution for indoor and outdoor repellent for
•
• Impregnation
• Conservation
• solidification
Biobond-an environmentally friendly product that prevents and eliminates
• moisture and humidity in buildings
• In the old and new buildings, mold, efflorescence
• nitric and nitrate destruction
weather resistance
Biobond penetrates deep into the wall and forms a water-and dirt-repellent surface by alkaline character as a neutralizer to mold growth.
It has excellent adhesion to the substrate.
Ecological - Environmental Impact
are developing no toxic fumes
Not triggering Allergies
It does not create any adverse health reactions to people, animals and plants. The surface must be
in a clean, dust-free state:
range from Biobond for all mineral substrates:
• New and old buildings
• Historic Old
surface preparation. Cracks, cracked joints, faulty connections, increasing moisture must be removed beforehand.
It is necessary to ensure that water and dissolved salts are not harmful to get behind the hydrophobic
zone, as this can lead to frost damage, flaking and salt blasting. Before each
Impregnation must adhering dirt and pollution crusts and efflorescence, algae and mosses
be removed by proper cleaning procedures.
It is in the cleaning, make sure that the building as little damage as possible. Cleaner residues (eg organic substances) must be completely washed out. In order to get
a higher security, we recommend a longer time (until saturated) operation. Biobond from below apply to the top!
walls with a water content of more than 50% are not impregnated, here are drainage measures required
Surface:
Biobond 4
• natural stone (sandstone, limestone)
• sand-lime brick
• Porous materials and eco-stones
• Broken Limestone
• Concrete
• mineral plaster
• mineral colors
Biobond 6
• Brick (porous)
• Old tile ( concrete and not engobed or uncoated clay)
• KSV-brick
• All mineral joints
• Concrete / Betonverblender
Biobond 8
• mineral paint
• mineral plaster
• mineral screed
• ceramic brick
• New roof tiles (concrete and brick, not slipped)
Biobond 12
• Mineral whitewash
consumption: depending on the absorbency 250-500ml/qm
Biobond is made from natural products - a product of mineral raw materials, contains NO phosphates , extenders or synthetic surfactants.
micro-organic repellent
Biobond is a biological, moisture-locking product, easy to use,
none and absolutely reliable; also suitable for injecting !
Specific properties of Biobond
aqueous, chlorine-free impregnating solution for indoor and outdoor repellent for
•
• Impregnation
• Conservation
• solidification
Biobond-an environmentally friendly product that prevents and eliminates
• moisture and humidity in buildings
• In the old and new buildings, mold, efflorescence
• nitric and nitrate destruction
weather resistance
Biobond penetrates deep into the wall and forms a water-and dirt-repellent surface by alkaline character as a neutralizer to mold growth.
It has excellent adhesion to the substrate.
Ecological - Environmental Impact
are developing no toxic fumes
Not triggering Allergies
It does not create any adverse health reactions to people, animals and plants. The surface must be
in a clean, dust-free state:
range from Biobond for all mineral substrates:
• New and old buildings
• Historic Old
surface preparation. Cracks, cracked joints, faulty connections, increasing moisture must be removed beforehand.
It is necessary to ensure that water and dissolved salts are not harmful to get behind the hydrophobic
zone, as this can lead to frost damage, flaking and salt blasting. Before each
Impregnation must adhering dirt and pollution crusts and efflorescence, algae and mosses
be removed by proper cleaning procedures.
It is in the cleaning, make sure that the building as little damage as possible. Cleaner residues (eg organic substances) must be completely washed out. In order to get
a higher security, we recommend a longer time (until saturated) operation. Biobond from below apply to the top!
walls with a water content of more than 50% are not impregnated, here are drainage measures required
Surface:
Biobond 4
• natural stone (sandstone, limestone)
• sand-lime brick
• Porous materials and eco-stones
• Broken Limestone
• Concrete
• mineral plaster
• mineral colors
Biobond 6
• Brick (porous)
• Old tile ( concrete and not engobed or uncoated clay)
• KSV-brick
• All mineral joints
• Concrete / Betonverblender
Biobond 8
• mineral paint
• mineral plaster
• mineral screed
• ceramic brick
• New roof tiles (concrete and brick, not slipped)
Biobond 12
• Mineral whitewash
consumption: depending on the absorbency 250-500ml/qm
Biobond is made from natural products - a product of mineral raw materials, contains NO phosphates , extenders or synthetic surfactants.
0 comments:
Post a Comment